The daily maintenance of the lathe can make its accuracy always new

First, the daily maintenance of ordinary lathe

The daily maintenance of the lathe can make its accuracy always new

Before class:
1. Clean the exposed surface of the machine tool and the sliding surface of the dust and add fuel;
2, according to the provisions of lubrication of various parts;
3, check the position of each handle;
4, empty test run.

Class:
1, strictly abide by the operating procedures;
2. At any time during operation, attention is paid to the operation of the machine tool and abnormalities are dealt with in a timely manner.

After class:
1. Clean the iron scraps completely;
2, wipe the machine parts;
3, parts home.

weekend:
1, wipe all parts of the machine thoroughly, keep the paint to see the true color of iron;
2, check the fasteners are not loose;
3, check the cleaning yarn and felt;
4, lubrication of the components.

Second, the daily maintenance of CNC lathes

1, every day to do a good job of clean lubrication of the rail surface, the automatic lubrication system of the machine tool to regularly check and clean the automatic lubrication system, check the amount of oil, add oil in time, check the oil pump is time to start the oil and stop;
2. Check whether the headstock automatic lubrication system is working properly every day and replace the headstock lubricant regularly;
3, pay attention to check whether the cooling fan in the electrical cabinet is working properly, whether the air filter is blocked or not, clean the attached dust;
4, pay attention to check the cooling system, check the liquid level, add oil or water in a timely manner, oil, water dirty to replace the cleaning;
5, pay attention to check the spindle drive belt, adjust the degree of tightness;
6. Pay attention to checking the tightness of the guide rails and adjusting the gap;
7, pay attention to check the hydraulic system of the machine tool tank pump for abnormal noise, the working oil level is appropriate, the pressure gauge indicates normal, whether the pipeline and the joints have leaked;
8, pay attention to check the guide rail, machine tool cover is complete and effective;
9, pay attention to check the mechanical accuracy of the moving parts, reduce the shape and position deviation;
10. Work well every day to clean the machine tool, clean the iron chips, wipe the coolant on the rails, and prevent the rails from rusting.

Daily maintenance of vertical lathes <br> Daily maintenance contents and requirements:
Time: 10 minutes before and 10 minutes after the succession, and 1 hour on the weekend;
Responsible person: The operator performs, inspection staff checks.

Before work:
First, check the shift notebook;
Second, in strict accordance with the equipment "lubricity chart" delineated refueling, so that timing, quantitative, qualitative;
Thirdly, when the equipment is shut down for more than 8 hours, it should be turned down 3-5 minutes before starting the equipment to confirm whether the lubrication system is unblocked and whether the operation of each part is normal before starting work.

working:
A. Always check the operation of the various parts of the equipment and the working conditions of the lubrication system. If there is an abnormal situation, notify the inspection staff immediately.
B. It is forbidden to place tools, workpieces and metal objects and pedals on each rail surface and protective cover.

After work:
A、Erase scrap iron and coolant on the rail surface, no black oil on the screw and light bar;
B. Clean the iron and debris around the equipment;
C. Fill out the equipment handover record.

Ultrasonic Vibrating Sieve

Ultrasonic Sieve,Ultrasonic Vibrating Sieve,Ultrasonic Sieve Deblinding,Stainless Steel Coffee Sieve

Xinxiang Zhenying Mechanical Equipment Co., Ltd , https://www.zhenyinggroup.com