Single impeller high pressure blower, high pressure swirl gas pump installation method;
High pressure blower installation;
1. It is necessary to use flat washers and spring washers to tighten the screws;
2, it is best to use rubber buffer to withstand the weight of high-pressure fan, especially high-power high-pressure fan, indispensable;
3, for some occasions where noise is required, can be installed to reduce noise (in general, about 5dB or so), installed at the end of the inlet duct or outlet duct;
4, for some of the occasions with high noise requirements, according to the conditions of the machine itself, plus a layer of cotton, to meet the site's noise requirements, the specific high pressure fan manufacturers can consult or professional noise management company;
5. When using Mianyin, pay attention to the distance between the high-pressure fan and the box, pay attention to the ventilation and heat dissipation of the high-pressure fan, and pay attention to the use of rubber buffer to withstand the weight of the high-pressure fan. The specific need to consult the manufacturers of high-pressure fans, such as high-pressure fan , Siemens, etc.
6. The connection of the inlet and outlet ducts of the high-pressure fan should be connected with a hose to isolate the vibration.
Different uses of the site, often using different filter filter filter accuracy, different filter elements have different methods of maintenance and service life, when ordering it is necessary to ask clearly.
In some special occasions, special protection is also required: For example, when used in a sealed environment, pay attention to ventilation and heat dissipation; when the ambient temperature (inlet air temperature is relatively high), pay more attention to ventilation and heat dissipation, or choose to allow air intake High temperature high pressure fan
For some brands of high-pressure fans, there may also be their own recommendations for use. Before buying, it is best to have a more detailed understanding.
The above is the single-wheel high pressure blower, whirlpool pump high-pressure mounting method introductions!
The quick couplings series can connect and disconnect in tube system quick, operation safely and reliable,many material and application for choose. Widely used in aviation, aerospace, automobiles, vessels, metallurgy, energy, petrochemicals, medical appliance, heavy machinery and other industrial fluid systems. There are ISO standard series, liquid cooling series, Customization Series and foreign trade series. Flat-faced poppet configuration ensure there is only little air inclusion when the valves coupling. The coupling body have standard high resistant carbon steel with zinc plating .Available seal optiongs have NBR,AU, FKM and EPDM ,etc.
