This regulation specifies the beneficiation plant concentrate packaging machines safe operation of the content and requirements. This procedure applies to the concentrate processing and packaging machine position of the concentrator. 2 content 2.1 The operator must be qualified after passing the safety training; wear protective helmets, gloves and other labor protection articles before going to work. Employees must wear three tight dresses; women workers must be in safety helmets, not wearing shorts, high heels, and slippers. 2.2 Before working, carefully check whether the bolts of the packaging machine are tight. 2.3 The safety protection device of the equipment must be kept intact, intact and firm. 2.6 It is strictly forbidden to reach into the bagging mechanism during the bagging operation. 2.7 Keep the equipment clean and clean the ore and debris on the weighing platform in time. 2.8 The grounding of each motor must be kept in good condition. 2.9 It is strictly forbidden to operate electrical equipment and electrical switches with wet hands. 2.10 It is strictly forbidden to strike the body and casing of the mechanical part. 2.11 Except for designated personnel and maintenance personnel, no personnel shall adjust the parameters without permission, and shall not open the casing. 2.12 Responsible for the operation, maintenance and maintenance of the equipment belonging to this post to ensure normal production. 2.13 Concentrate hoisting and stacking must be arranged neatly. The height of the ton bag should not exceed 5 layers. When the crane is to be transported, it must be routed by the designated route. The packager should avoid it in time. 2.14 When the baler silo is knotted, it must be shut down. Before starting the machine, it is necessary to communicate up and down, and after confirming, drive. 2.15 Check the tightening degree of each part of the baler and find that it is tightened when loose. 2.16 After each class has finished the concentrate, the scattered ore powder should be recycled in time to ensure that the ore powder is not lost. 2.17 Strengthen the collection of items used and the storage of tools. 2.18 Do a good job in environmental sanitation in the scope of work. 2.19 Fill in the records carefully, so that the writing is clear and intact. 2.20 Pay attention to safety during work, and achieve safe and civilized production. Twinkle System Technology Co Ltd , https://www.pickingbylight.com
Safety operation procedures for ore concentrate packaging machine
　  1 Scope