Recycle Plastic Oil to Diesel Fractional Distillation Machine

July 06, 2020

Model NO.: JNC-3
Heat Method: Fuel Oil, Gas
Max Tempreature: 410
Oil Yield: at Least 85%
Color Grade: <=2
Installation: Engineer at Site
Time: 18hours
Delivery: 30 Working Days
End Product: Main Diesel Fuel
Trademark: junneng
Transport Package: Container Traffic
Specification: 10*5*5meters
Origin: Chongqing, China
HS Code: 8421299090
               recycle plastic oil to diesel fractional distillation machine
overview 
 This recycle plastic oil to diesel fractional distillation machine can be used in black engine oil,Crude oil , plastic oil and shale oil, to get gasoline and diesel oil through distilled catalyst. Pumping into the heater with Waste oil , through the coal (or fuel oil)heating to working temperature, the maximum working temperature about 410 degree and the required  gasoline and diesel oil can be obtained after catalytic distillation. When the reaction of waste oil in reactor is complete, stop heating, and remove residue from the tank of bottom, then this machine can be used again.
 
2,Systems of equipment
  Reaction tank: waste oil will be pumped into this tank from the primary filter .
 Heating system: by burning coal or fuel oil to make the oil temperature up to setting value. This 
 system equips with insulation system. 
  Catalytic system: waste oil reaches the predetermined temperature, via catalytic effect, and then 
 the gaseous hydrocarbons will become gasoline and diesel composition.
 Cooling system: gasoline and diesel after catalytic effect can be condensed into liquid materials.
 Temperature control system: ensure that waste oil transform into gasoline and diesel oil, waste 
 oil drying by distillation, can stop   heating   timely.
  Exhaust gas handling system: a small amount of not liquefied gas via treated, can meet emission 
 standards.
 
 3,Index of oil after treatment:
 l diesel oil : 86-88%, 
 l gasoline oil: 5-6%,
 l oil residue: 6-8%.
 Low-speed diesel engine can be used directly.
 
4 performance characteristics,advantage introduction
 1 Working principle: waste oil under the action of catalyst distillation to get high quality diesel
 2 Do not need acid,alkali,clay to refine the final diesel, just use our plate frame filter machine to remove the impurities.
 3 Direct heating with fuel or gas, convenience, economy, health, safety, environmental protection
 4 The total cost of processing one ton used oil only USD22(including fuel, electricity and catalyst cost)
 5 High oil yield: diesel 86~88%,gasoline 5~6%,oil residue 6~8%
6This machine use a special way heating,high thermal efficiency, and difficult to form carbon fouling, greatly reducing consumable and maintenance costs.
 7Currently in the market, the distillation is based on the coil heating, the temperature can't meet the technical requirements, oil yield only 65%.This kind of heating mode can make it easy to scale.what's more, it needs high temperature pump, which is expensive, easily breakable, need frequent replacement, high cost in the later period
 8 This recycle plastic oil to diesel fractional distillation machine is safe, reliable, durable, easy operation, low labor intensity, 1 to 2 workers can easily operate the machine.
Recycle Plastic Oil to Diesel Fractional Distillation Machine
Some question about JNC machine
1 what kind of raw material the JNC machine can treat
 JNC machine can treat all kinds of waste engine oil,plastic oil and crude oil
 
2 what kind of final product we can get
main product is diesel,a little gasoline and oil residue
 
3 how about the oil yield
in normal industrial production,can get at least 85% diesel.this can be assured
 
4 how to heat the JNC recycle plastic oil to diesel fractional distillation machine
 can use fuel oil or gas to heat,environmental friendly,don't suggest use coal.not good for environment
 
5  need any other special chemical in the process
just need our ond kind catalyst,don't need other chemical.don't need acid and clay
 
6 what kind of equipment need customer prepare
customer just prepare the good oil and waste oil tanks,a water pool and power supply
 
7 how to install the JNC machine
engineer will at site for installaton and  commissioning,till customer can use smoothly
 
 8 how about the guarantee
 5Year Guarantee for main parts,1 Year for mechanical and electrical products. any question of the plant will reply in 24 hours!

 
9  need how many workers to operate the machine,need any special technologist?
   2 workers can easily operte the plant,don't need special technologist
 
10 about how long can deliver the machine
according to different capacity,usually 30~50 working days can deliver the machine

Except this recycle plastic oil to diesel fractional distillation machine,we also have other series products

ZSC Engine Oil Purifier Series
ZSA vacuum distillation machine to base oil
JNC Waste engine oil and black oil regeneration diesel oil equipment
RZL Lubricating Oil Purifier
RZL-B Series Lubricating Oil Purifier
TZL Turbine Oil Purifier
ZLA Two-Stage Vacuum Oil Purifier Series
ZLC Two-Stage Multi-Function Vacuum Oil Purifier Series
ZL series of high-efficient vacuum oil purifier
KL FIRE-RESISTANT OIL FILTER MACHINE SER
TLA light fuel oil purifier series
JL Portable-type Oil Purifier
LY Plate Pressure Oil filtering Machine
 
other keywords of our product
oil purifier, oil filtration, oil purification, oil filter, oil treatment, oil saving, oil recycling, oil processing, oil filtering, energy saving, oil regeneration, oil processor, oil filter, oil process, oil purify, oil regenerating, oil restoration, waste oil disposal, oil reclaimed, oil reclaiming, waste oil management, oil regenerate, oil reconditioned, oil reconstituted, oil restituting, oil recovering, oil recondition, oil filters, oil refinery, oil refiner, oil cleaning, oil recycle, oil reclaiming, oil separating, oil recovery, oil recycle, oil reclamation, oil refinery, oil separator, oil separation, oil purifiers, oil recondition, oil dehydrator, oil water separator, oil dehydration, machine recycling used oils, waste oil filter, oil degasifier, waste engine purifier, oil refinery plant, mini petrol refinery, oil recycling machine, quenching oil filter, moblie oil puruficator, small oil recycling,small scale oil refinery,vacuum distillation machine,air distillation plant
 

- Imported advanced computer systems, Chinese / English interface. 
- Can save 50 sets of mold parameters.
- Advanced clamping structure and injection parts, precision hydraulic system and circuit design.
- Suitable for producing different types of precision small parts.
- A variety of text can be switched.
- Manual, semi-automatic and fully automatic mode.
- Automatic movement monitoring with alarm and fault diagnosis.
- Function of slope setting can set the start and stop of movements, so as ensure the smooth movement.
- Quality: 12 month Quality guarantee ,Free spare parts replacement, ( NOT include man- made sabotage) 
- Service:We provide free advanced training and maintenance in china factory,and 24 hours on- line or phone service if you request we also can provide installation and training abroad,until customer's satisfaction 
- Delivery time: 30days after advance payment

Injection Moulding Machine Special For Garbage Can

Moulding Machine For Garbage Can, Trash Basket Mold Machine, Plastic Moulding Machine Garbage Can

Ningbo Shuangma Machinery Industry Co., Ltd , https://www.bolemachinery.com