The cause of air brake failure: insufficient air pressure in the air cylinder, excessive free stroke of the brake pedal of the suction truck, insufficient air pressure in the brake air chamber, excessive clearance or poor contact between the brake shoe of the suction truck and the brake drum; Brake shoes have oil stains or wear, rivets exposed. The method of inspection and exclusion is: first check the gas in the gas cylinder too low. If the pressure of the gas cylinder does not reach the specified value after the engine is started for a few minutes, the brake pedal of the suction truck can be used to check. When you relax the brake pedal, if you can hear a clear brake valve exhaust sound, indicating that the system pressure is normal, and the barometer is faulty. If the barometer is good, it indicates that the air compressor is defective or the pipe is leaking. The air compressor does not pump air. In addition to the air compressor itself, the compressor belt is too loose or the oil may cause slippage. It should be checked and eliminated. The pressure of the air reservoir should normally be checked for the free travel of the brake pedal of the suction truck. When the brake pedal is pressed to the end, the air pressure in the brake air chamber should be 4-5 kg. When the air pressure is insufficient, use the brake control valve adjustment screw to adjust. When adjusting the brake pedal of the suction truck after the adjustment is appropriate, ensure that the brake control valve exhaust valve can be completely closed, there is no leakage phenomenon, and when the pedal is relaxed, the exhaust gas is unblocked. After all the above-mentioned inspections are good, but if the brakes are still not working, check the wheel brakes of the suction truck. According to the regulations, after adjusting, it is still unqualified. The brake drum should be dismantled and inspected to check whether there is oil on the brake shoe friction plate, whether the brake drum is deformed, whether the friction plate is in good contact with the suction drum brake drum, and whether the friction plate is Worn out, exposed rivets. Hubei Cheng Li Special Purpose Vehicle Co., Ltd., Sales Manager Chen Xin, Contact Tel: Welcome to visit us!
3) Multi spindles can work at the same time,also can work alone, many times increasing inefficiency. can also
control the machine heads independently, can use only one head to process and make increasing the working
area.
cylinder products,it also can easily engrave 360 degree human body, Buddhist statue, sculpture and other art
works
5) Easy-to-operate Taiwan SYNTEC control system
6) Powerful PowerMill software with post processor
7) Except X, Y, Z and Rotary Axis, the 5th axis is the spindle can swing front and back, which can do Multi-Heads CNC Router,Multi-Heads Wood CNC Router,Multi-Spindles CNC Router,Multi-Heads Woodworking CNC Router Shandong Sunrise CNC Machine Co., Ltd , http://www.scmcnc.com
Pneumatic System CNC Multi Head Router / ATC CNC Router with 4 Axis Rotary 1530
Multi Heads 5 Axis Rotary Simultaneous CNC Wood Carving Router Machine
Jinan Factory Supply High Quality Woodworking Multi Head CNC Router for Wood Furniture
Multi Workstage, Pneumatic Three Heads, 1325 Wood Working CNC Router
Advertising industry: advertising signs, logo making, acrylic cutting, plastic molding, a variety of
materials advertising the production of decorative products.
Mold Industry: engraving copper, aluminum, iron and other metal molds, as well as artificial marble,
sand, plastic sheeting, PVC pipe, wood and other non-metallic mold.
Other Industry: a variety of large-scale relief sculpture, shadow carving, widely used in the craft industry.
Woodworking: three-dimensional wave board processing, cabinet doors, solid wood doors, wooden craft, paint doors, screens, craft fan window processing, shoe polisher, game cabinetsand panels, mahjong table, computer desk and furniture products, auxiliary processing
2) Each spindle has two heads with two tools, which is equivalent to Auto Tool Changer
4) This machine is very suitable for furniture bulk production such as desk legs/stair handrails and other column /
more complex work.
Check and eliminate suction brake air brake failure
1) This 5 axis cnc router machine with 8 rotary axis is with removable table, so, when you cut and engrave the flat /
plane, just need to put on this table; when you do the column / round / cylinder, just need to take down the
moveable table.