Summer scorching owners need to pay attention to tire safety tips

With the arrival of hot summer, tires have become the focus of attention. Because the tire is like a person's foot, whenever the car is running, it will rub violently with the ground. Attention and maintenance are especially important.

Daily maintenance tire pressure is the most important

In summer, the road surface temperature is often above 70°C. In a car that has been traveling in hot summers for a long time, tires that are damaged or have weak spots are prone to puncture or rapid wear due to high tire pressure. Affected by the temperature, the tire gas will automatically expand, tire pressure will rise from 2.3 kg to 3 kg or more, in order to ensure the tire pressure, it is recommended to fill nitrogen in summer, filling pressure should be reduced by about 10%. It is advisable to check the tire pressure once a month. It is advisable to check the time before the start of the morning car because the tire will completely cool down after 4 hours of standing and the measured air pressure is most accurate. If the tire pressure is too high, some gas will be released until the tire pressure matches the standard air pressure. If it is lower than the standard, you need to make up the air.

Be careful to prevent overuse

When driving at high speed for a long time in summer, you should cool off your tires in a cool place after driving some distance. When driving hot in the noon, the speed should be properly reduced. Pay attention to the carrying capacity of the tires and never overload them. This will keep the tire pressure normal and will not overuse. The method of preventing overuse is also that the tires are regularly replaced after driving for a certain period of time in order to equalize the wear of the four wheels.

When parking in summer, the car should be parked in a location where there is no sunlight for a long period of time. Because of long-term exposure to sunlight, tire rubber is exposed to sunlight and ultraviolet radiation can cause aging of the tire's rubber surface. The odds have also increased. In addition, parking should ensure that all four wheels are parked on the same level of ground and must not be parked on a high and low road. Otherwise, the tire at the lowest position will be subjected to excessive pressure, causing deformation of the wire inside the tire and damage to the tire.

The car is regularly cleaned of tires to prevent the presence of foreign objects in the groove of the tread pattern. Stones or foreign objects in the tread groove are removed to avoid deformation of the tire crown. Check whether the tire sidewall has flaws, stab wounds, and if the cord is exposed, replace it if necessary. If foreign objects such as nails are found in the tires, do not panic and do not rush to pull them out. You should immediately go to a professional tire shop for help.

Preventing punctures is especially important

The accident caused by a puncture in summer was high in highway accidents. Severe tire wear causes the carcass to be too thin, and the inside of the tire is constantly heating. At this time, it is easy to be punctured by the object. In addition, the summer weather is overheated, which makes it possible to puncture the tire. However, in addition, tire bursts are also related to several factors below.

Insufficient tire pressure. If the tire pressure is insufficient, the sidewall of the tire is easily broken and burst. If it is inflated before the road, the tire leaks due to wear and dust on the valve, which makes the tire's internal tire pressure too low, which can easily lead to puncture. Tire pressure too high. It can make the defects of the tire (such as the previously damaged part) burst, such weather is more common in the hot summer weather or long hours. Vehicle overloaded. The danger of overloading a vehicle with tires is self-evident. Apart from trucks, the car must also prevent too many people and objects from getting into the car. Drive through sharp objects at high speed. When the vehicle is running at high speed, it is also a common cause of accident that tires rub against sharp stones or other sharp objects on the road surface, resulting in air leakage and puncturing.

Lastly, do not frequently perform abnormal accelerations such as sudden acceleration, sudden braking, and sudden steering. This can result in rapid deformation of the tire, and it is prone to excessive wear and tear, causing the tire to burst.

Tire can be properly upgraded

The tire life of the tires set by the general manufacturers is between 80,000 and 100,000 kilometers (or about 5 years), but the specific conditions are still determined by the owner's driving conditions, so you must regularly check the tire's wear, if Excessive tire wear should consider replacing tires to ensure safe driving. When changing tires, it is of course good to use the original ones, but upgrading them properly may have a better effect.

There are about two ways to upgrade. Quality Upgrade: Maintain the specifications of the original matching tires, but switch to higher grade tires to improve the quality of the tires, such as a more beautiful tread pattern, better drainage, less rolling noise or stronger gripping Fertility and so on. Specification upgrade: Within the scope of the license, upgrade the tire specifications of the original vehicle upwards, that is, increase the tire size. The purpose of this practice is to increase the grip in addition to the factory. Of course, it can make the overall appearance of the vehicle after the tire change more beautiful and more powerful. Normally, the specifications are upgraded while the quality is also upgraded.

It should be pointed out here that the upgrade of the specifications will bring about friction and fuel consumption increase, and the cost of buying tires will also increase. Therefore, before you can upgrade your car's tires, you must carefully consider it. Fortunately, today's major brands have different grades of products, there are clear reference coefficients given, you can find experts to make a recommendation before making the final decision.

Arcylic Like

EPT specialize in Rapid Vacuum Casting (also referred to as room temperature vulcanization/RTV) to create short run quantities of production-like parts at low cost to the customer.
Vacuum casting offers a wide range of options for companies needing specific finishes,materials, or other features in their prototypes. We have the ability to simulate a full range of thermoplastics and elastomers, and we can also over-mold one
material over another to simulate, for example, rubber over ABS, or opaque plastic over transparent plastic. It is also possible to over-mold threaded inserts.
After casting, painting and printing is common, although polyurethane casted parts can be colored in the mold. EPT also specialize in producing high-gloss clear parts by using a CNC machined and polished acrylic master model. Polyurethane casted clear parts are very high quality.
We can create small and large urethane cast parts with production-like aesthetics and material properties for a range of applications, including medical and healthcare, military, automotive, electronics packaging, consumer products, and others.


Arcylic Like,Arcylic Like Prototype,Auto Lighting Outer Lens,High Bright Surface Crystal

Ningbo Expert Mould Plastic Co., Ltd. , https://www.prototypesmaker.com