Cabinet Tongue Cam Lock,Advertising Box Lock,Outdoor Cam Lock,Furniture Lock Guangdong Haitan electric cabinet lock Co., Ltd , https://www.htcabinetlock.com
Fireproof and thermal insulation clothing testing items and testing basis
Test items and test basis for the whole vehicle of thermal insulation clothing
1. Mark
The marking of the thermal insulation suit shall meet the requirements of Article 3.1 of GB7258-1997 "Technical Conditions for Safety of Motor Vehicle Operation".
2. size
2.1 External dimensions
The external dimensions of the thermal insulation clothing should meet the requirements of Table 1 and Table 2 in GB1589-1989 "External Dimensions Limits of Automobiles" and GB7956-1998 "Fire Performance Requirements and Test Methods for Thermal Insulation Clothing". When the ground clearance of the bottom side of the mirror is less than or equal to 1800mm, the extension of the exterior rearview mirror should meet the requirements of GB15084-1994 "Automotive Rearview Mirror Performance and Installation Requirements".
2.2 Rear suspension
The rear suspension of fire-fighting insulation clothing should meet the requirements of Article 3.3 of GB 7258-1997 "Technical Conditions for Safety of Motor Vehicle Operation".
3. Roll stability angle
The roll stability angle of the thermal insulation suit shall meet the requirements of Article 3.7.1 of GB 7258-1997 "Technical Conditions for Safety of Motor Vehicle Operation".
4. Installation requirements of rearview mirror
The installation requirements of the rear-view mirror of the thermal insulation suit shall meet the requirements of Article 6 of GB 15084-1994 "Performance and Installation Requirements of Automobile Rear-view Mirrors".
5. Lighting and signal devices
The installation of the lighting and signal devices of the thermal insulation clothing shall meet the requirements of GB 4785-1998 "Installation Regulations for External Lighting and Signal Devices of Automobiles and Trailers".
6. Interior materials
The interior materials of thermal insulation clothing should meet the requirements of GB 8410-1994 "Combustion characteristics of automotive interior materials".
The company specializes in the production and sale: marine oil and water separator device, 15PPM type bilge water separator, SWCM type sewage treatment equipment, ZC sea life sewage treatment equipment, SWCH split type marine sewage storage cabinets, marine fuel separation Machine, inflatable fire fighting and rescue cushion, marine fuel supply unit, fuel separator unit , assembled pressure water tank, steam heating water tank, electric steam heating water tank, pressure water tank, electric heating hot water tank, positive pressure type Fire-fighting air respirator, self-priming air respirator, electric long-tube respirator, firefighter equipment, safety protection equipment, backpack wind fire extinguisher , portable wind fire extinguisher ; diving breathing apparatus, wet and dry diving suit, Emergency escape respirator device, full face gas mask, fire chemical protective clothing, fully enclosed heavy chemical protective clothing, firefighter fire protection protective clothing, firefighter thermal insulation clothing, fire monitor, breathing apparatus air pump, portable air foam gun device, international shore connection, dual-purpose spray gun fire brass, copper interfaces, copper hydrant, pilot ladder, boarding ladder, fire pump, immersion suits, new life jackets, the old section of life jackets, inflatable life-saving clothing, Fire protection enhanced special life jacket , marine three-piece life jacket, water sports suit, life buoy, life buoy light, life jacket light, life raft light, explosion-proof light, portable anti-riot searchlight, strong light explosion-proof flashlight, rechargeable anti-riot flashlight, hydrostatic pressure release Self-righting inflatable life raft, ordinary throw-on life raft, hoistable inflatable life raft, open factory life raft , marine gong, marine fog clock, Robertson stretcher, platform crane, column crane Cage, hanging basket, fire-resistant lifeline, various specifications of signal balls, marine red light signal, marine parachute, floating smoke signal, combined smoke, rope thrower, rope throwing equipment, dry powder fire extinguisher, carbon dioxide fire extinguisher, foam fire extinguisher, cart Type fire extinguisher, fire hose, FRP fire hose box, fire equipment box, fire extinguisher box, life jacket box and other products. The products are in compliance with the 2000 amendment to the 1974 "Convention for the Safety of Life at Sea" and the international life-saving equipment test MSC.81 (70) requirements and relevant requirements of the national standard, and have obtained the China Classification Society marine product type approval certificate. Some of the products have been exported to Southeast Asia, Europe, America and other countries, and are well received by customers at home and abroad. The company continues to improve various management systems and passed the CSQA ISO9001: 2000 quality management system certification in May 2005. All employees of the company adhere to the business philosophy of "safe, reliable, high-quality, and abiding delivery of products stipulated in the contract, seek development with technology, create benefits through management, improve product and service quality, and continuously meet customer requirements" to better serve the ship Fire and life-saving services!