Vertical deep hole falling mine sublevel caving mining method typical plan - mining work

It is the layout of the next off-board. That is, ore transportation, pedestrian, ventilation, materials and other mining projects are arranged outside the lower disk. The stage transportation is a circular transportation system for the pulsed loading.

Because if these roadways are opened in the veins, the main transport lanes will be destroyed along with the mining blocks, so that the wind flow is not guaranteed.

(2) Sliding well layout: The upper two sections adopt inclined inclined chutes. The next two sections use independent vertical mines.

(3) Electric roadway: The electric raft of this method is also arranged outside the lower disk, using a single-side sulcus funnel.

(4) Pedestrian Ventilation Patio: It is not provided for each of the ore blocks, but a ventilated pedestrian well is provided for every 2 to 3 ore blocks, and is connected with the sub-sections of the electric roads for pedestrians and air intake. The patio of the material is used, and pipelines are laid in the patio. (generally one set per mining area)

(5) The high-slip well of each ore block: the high-slip well of each ore block is connected with the extra-vehicle transport roadway of the upper stage, and communicates with each section of the electric roadway by the contact road as the back of each section of the electric ramp. Wind patio. (The figure is not connected, it is actually connectable. It can also be disconnected)

Tube Filling And Sealing Machine

Production Introduction:

It's suitable for the filling, sealing & date printing of various pastes and liquid viscosity materials into plastic tubes., widely used in tube packing of daily chemistry, pharmacy industries.

Characteristics:

1. This machine features its mechanism struture, stable operation and high efficiency,. Besides, it's widely welcome for its simple structure, low noise, convenient operation & maintenance and low rate of fault.

2. It use manual insert tubes and position, PLC control system, heat the inner tube with hot air, accurate position. It's an ideal machine for sealing plastic tubes for it's unique realiability and longevity.

Introduction:

It is lately developed and widely used in the fields of toothpaste, cosmetics, medicine etc. It is suitable for all kinds of plastics compound soft tube, plastics soft tubes filling and sealing.

This equipment can automatically fill, seal, stamp batch numbers and exit tubes, except feed tubes by hand.

It adopts inner heating. We completely adopt stainless steel in the fill-packing section and the parts connecting with stuffs, which can proof acid, alkali and corrosion. All the channels are connected quickly by clip-hoop; they can be packed, unloaded fast and agilely. The material-valve can be rotary valve or ball valve according to the different material, it can be cleanout easily, theres no place for the dirty. Manual and computer controlling both can be used to adjust measure.

Tube Filling And Sealing Machine,Tube Filling Sealing Machine,Automatic Tube Filling And Sealing Machine,Plastic Tube Filling And Sealing Machine

Ruian Science Machinery And Technology Co., Ltd. , https://www.science-packs.com