Plastic PP PE Barbed Water Hose Conntcor Fitting Female

February 25, 2024

Connection Type: Welding
Name: PE Pipe Fittings
Application: to Connect PE Pipe
Connection: Hot Melting
Usage: for Cold Water
Purpose: for Water Transport System
Benift: No Harmful Elment
Brass Part: National Standard Brass with Zinc
Cut Methord: Use Scissor
Trademark: kangyu, or OEM
Transport Package: Carton
Specification: made by polypropylene and brass part
Origin: Liyi City, Shandong Province, China
HS Code: 391720000
Connection Type: Welding
Name: PE Pipe Fittings
Application: to Connect PE Pipe
Connection: Hot Melting
Usage: for Cold Water
Purpose: for Water Transport System
Benift: No Harmful Elment
Brass Part: National Standard Brass with Zinc
Cut Methord: Use Scissor
Trademark: kangyu, or OEM
Transport Package: Carton
Specification: made by polypropylene and brass part
Origin: Liyi City, Shandong Province, China
HS Code: 391720000
Product Description

 

1, High Temperature Resistance
2, Heat insulation and Saving Energy
3, Corrosion Resistant
4, Lower Installation Costs
5, Higher Flow Capacity
6, Long Life
7, Recycled and Environment-friendly

electrical fusion PE pipe fittings for water 

Product Description



PE pipe electrical fittings list
 
female lectrical  coupling lectrical coupling  reduce lectrical coupling  male lectrical  coupling
lectrical tee lectrical reduce tee    
90 lectrical elbow elbow lectrical  reduce lectrical male elbow lectrical female elbow
       

factory overview
Plastic PP PE Barbed Water Hose Conntcor Fitting Female
Product show
Plastic PP PE Barbed Water Hose Conntcor Fitting Female


Plastic PP PE Barbed Water Hose Conntcor Fitting Female





 RAW MATERIAL
Plastic PP PE Barbed Water Hose Conntcor Fitting Female
PRODUCTION PROCESS
1.Measure and mark the depth or weld area of the pipe fitting (such as saddle pipe fitting) on the pipe with marker pen.
2.The oxide layer in the welding zone must be completely removed before welding.cleaning the pipe surface
3. The welding surfaces of pipes and fittings must be absolutely clean, dry and free from oil pollution.
4. Insert the welded end of the pipe into the limited shoulder or marking depth of the pipe fitting, and the pipe fitting must be installed together with the pipe without stress
5. Connect the welding machine plug to the pipe fitting jack, and accurately input the welding time and cooling time specified on the pipe fitting.Or scan the barcode directly to enter the welding parameters.
6, preparations were made, press the confirmation key, welding opportunity once again shows that welding parameter, completely confirmed, and then press start button to start the welding, the welding will automatically alarm prompt, after the end of the welding procedure.

CONTATCE US

EILEEN TENG

SHANDONG KANGYU PIPE INDUSTRIY CO.,LTD

JIAHZHAI INDURTARY PARK,LINYI CITY,SHANDONG PROVINCE ,CHINA

PHONE NO:0086 15168998025
Product Description

 

1, High Temperature Resistance
2, Heat insulation and Saving Energy
3, Corrosion Resistant
4, Lower Installation Costs
5, Higher Flow Capacity
6, Long Life
7, Recycled and Environment-friendly

electrical fusion PE pipe fittings for water 

Product Description



PE pipe electrical fittings list
 
female lectrical  coupling lectrical coupling  reduce lectrical coupling  male lectrical  coupling
lectrical tee lectrical reduce tee    
90 lectrical elbow elbow lectrical  reduce lectrical male elbow lectrical female elbow
       

factory overview
Plastic PP PE Barbed Water Hose Conntcor Fitting Female
Product show
Plastic PP PE Barbed Water Hose Conntcor Fitting Female


Plastic PP PE Barbed Water Hose Conntcor Fitting Female





 RAW MATERIAL
Plastic PP PE Barbed Water Hose Conntcor Fitting Female
PRODUCTION PROCESS
1.Measure and mark the depth or weld area of the pipe fitting (such as saddle pipe fitting) on the pipe with marker pen.
2.The oxide layer in the welding zone must be completely removed before welding.cleaning the pipe surface
3. The welding surfaces of pipes and fittings must be absolutely clean, dry and free from oil pollution.
4. Insert the welded end of the pipe into the limited shoulder or marking depth of the pipe fitting, and the pipe fitting must be installed together with the pipe without stress
5. Connect the welding machine plug to the pipe fitting jack, and accurately input the welding time and cooling time specified on the pipe fitting.Or scan the barcode directly to enter the welding parameters.
6, preparations were made, press the confirmation key, welding opportunity once again shows that welding parameter, completely confirmed, and then press start button to start the welding, the welding will automatically alarm prompt, after the end of the welding procedure.

CONTATCE US

EILEEN TENG

SHANDONG KANGYU PIPE INDUSTRIY CO.,LTD

JIAHZHAI INDURTARY PARK,LINYI CITY,SHANDONG PROVINCE ,CHINA

PHONE NO:0086 15168998025

Small Hole Driling Machine

Small Hole Driling Machine,Small Driller,Residential Water Well Drilling,Small Bore Drilling Driling Machine

Taizhou Jiangzhou CNC Machine Tool Manufacturing Co.,Ltd , https://www.machinetzjz.com