1. Check the brake system    The high temperature easily causes the brake fluid to evaporate to generate gas, forming a gas barrier, and the brake friction plate is also easy to ablate, causing the brake to malfunction. The brake system should be checked and adjusted in time, the brake fluid should be added or replaced, and the air resistance in the pipeline should be eliminated. Guaranteed reliable braking performance. 2, check the tire pressure    Also pay attention to tire pressure during summer driving. Proper tire air pressure gives the motorcycle maximum traction, stability, driving comfort and long life. Insufficient tire pressure not only increases driving resistance, increases engine load and fuel consumption, but also causes the tire to fall off the rim; excessive tire pressure can reduce the stability of the motorcycle. Therefore, before leaving the car, you should carefully check the tire pressure of the motorcycle. 3. Change the oil in time    In summer, the ambient temperature is high, the viscosity of the oil is reduced, and the oil is correspondingly thinned. The oil that uses the required viscosity will deteriorate the lubrication condition of the friction surfaces of the engine and aggravate the wear of the machine. In addition, the service life of the oil at high temperatures will also be shortened. Therefore, when entering the summer maintenance, it is best to change the oil in time. 4, clean the filter to adjust the gas    Appropriately increase the number of cleaning of the air filter to reduce the air intake resistance; clean the carburetor in time to reduce the oil level of the float chamber; properly adjust the gas distribution screw to reduce the oil supply and ensure the correct air-fuel ratio. Through the above measures, reduce fuel consumption and prevent the engine from overheating. 5, avoid overload    Overweight and excessive load will cause the engine to be overloaded, and it will always be in a bad working condition with large throttle and low speed. This will reduce the normal cooling effect, make the engine overheat, deteriorate the lubrication conditions, and increase the wear, which will lead to a gradual decline in engine performance, which will eventually shorten the service life of the motorcycle. 6, avoid driving for a long time    After a long distance driving, stop and rest, let the engine cool down, do not pour cold water on the engine to prevent bursting; keep the engine clean and ensure good heat dissipation. Flower Sleeve,Flower Bouquet Sleeves,Sleeve Flowers,Cellophane Flower Sleeves SHANGHAI WELLONG IMPORT AND EXPORT CO., LTD , https://www.shanghaifloralfoam.com
Motorcycles should also pay attention to cooling and heat protection
The weather is good and hot in these two days, the long sleeves of the trousers can not be worn, and the street is beginning to show off the back! A good knight, not only knows how to care for himself, but also knows how to care for the car. After all, it will feel hot. As the temperature gets higher and higher, there are a few tips about the heat release of motorcycles. You have to know!