V6 engine

There are 3, 4, 5, 6, 8, 10, and 12 cylinders for the number of cylinders used in automobile engines. Engines with a displacement of 1L or less commonly use 3 cylinders; (1-2.5)L is generally a 4-cylinder engine; 3L or so engines are generally 6 cylinders; 4L is 8 cylinders; and 5.5L or higher is a 12-cylinder engine. In general, the same number of cylinders, the more the number of cylinders, the greater the displacement, the higher the power; Under the same displacement, the more the number of cylinders, the smaller the bore, the speed can be increased to obtain greater power .

The arrangement of cylinders is mainly inline, V-shaped, W-shaped and so on. Generally, the cylinders of the engine below 5 cylinders are arranged in an inline manner, and a few 6-cylinder engines also have an in-line mode. In the past, there have been in-line 8 cylinder engines. The cylinder block of the in-line engine is lined up in a straight line, the structure of the cylinder block, cylinder head and crankshaft is simple, the manufacturing cost is low, the low-speed torque characteristics are good, the fuel consumption is low, and the application is extensive. The disadvantage is that the power is low. Generally, gasoline engines with a power consumption of 1L or less use three-cylinder in-line engines. (1-2.5)L gasoline engines use inline four-cylinder engines. Some four-wheel drive vehicles use in-line six-cylinder engines because they have a small width and can be equipped with boosters and other facilities nearby. The in-line 6-cylinder has better dynamic balance and relatively small vibration, so it is also adopted for some medium and high-polar cars.

(6-12) Cylinder engines are generally arranged in a V-shape, in which the VIO engine is mainly mounted on a racing car. The V-shaped engine is small in length and height, and is very convenient to arrange. It is generally believed that the V-shaped engine is a relatively advanced engine and it is also one of the symbols of the sedan level. The V8 engine has a very complex structure and is expensive to manufacture, so it is less used. V12, the engine is too heavy and heavy, and only a few of the limousines are used. At present, the most common engines are mainly in-line 4-cylinder (14) and V-type 6-cylinder (V6) engines. In general, the displacement of the V6 engine is higher than 14 and the V6 engine is more stable than the 14. U is mainly installed on ordinary cars, while V6 is installed on mid-to-high-end cars.

200MW Power Plant:

Our company provide professional technical service for 200Mw Power Plant, replacement of Voith Coupling, Geared Hydraulic couplings overhaul, replacement of booster pump. 

Also we help client to make a general comprehensive solution proposal of energy saving transformation for boiler feed water pump in thermal power plant. 

From 2012, we have finished Energy Saving Project for more than 20 thermal power plants, and the electricity saving ratio is about 23%.

Please contact us directly if you are interested in this project.

R15k551 1 1

1 4

200MW Power Plant

200Mw Power Plant,Micro 200Mw Power Plant,200Mw Hydro Power Plant,Mini 200Mw Power Plant

Shenyang German Machine Hydraulic Transmission Machinery Co., Ltd. , http://www.hcouplingc.com