Trap is based on media pressure, displacement, back pressure and many other factors to choose the most suitable product, the trap must be selected, not selected expensive. Trap is an energy-saving valve products, so the choice of a trap, especially the high-quality traps bring energy savings and improve production efficiency of the funds will be purchased to buy traps dozens of times. Here will be different media pipeline, the selection of steam traps to do an analysis, but the specific choice of which type and diameter of the trap, it depends on the specific parameters calculated. For the selection of steam traps, requiring high sensitivity, accurate blocking steam drainage, no leakage of steam, can improve steam utilization, reliable performance, high back pressure, long life, easy maintenance is the preferred conditions. 1. In the production process of heat exchange equipment, drying room, rapid heat exchangers, distillation equipment need rapid heating, does not allow the existence of condensed water production heating equipment, mechanical traps should be used. Mechanical trap is not affected by changes in temperature and pressure, water is row, low degree of supercooling, heating equipment without water, can make the heating equipment to achieve the best working temperature. One free-float steam trap the most advanced structure, very sensitive, the minimum degree of supercooling 0 ° C, to row saturated condensate temperature, no steam leakage, the advantages of up to enable the heating equipment to achieve the best efficiency. Is the ideal production process heating equipment trap. 2. In the steam pipe, heating pipelines, small heating equipment, heating equipment, steam temperature equipment is not demanding, should be selected thermostatically trap. Thermal static trap large degree of supercooling, condensate condensation water temperature is low, you can make full use of the sensible heat of high temperature condensate, energy saving effect is good. One of the most advanced membrane steam traps structure, without manual adjustment, very sensitive, the maximum degree of undercooling 15 ℃ and 30 ℃ for the selection of two kinds of membrane boxes, not afraid of freezing, small size, can be installed anywhere, In the pipeline can repair and replace the spool, saving money and labor, long service life, a wide range of applications, is the thermal static trap quality. 3 in the high temperature and pressure overheating steam lines and equipment, should be selected overheated steam steam trap. Superheat steam traps can separate high-temperature condensate generated when superheated steam disappears under harsh conditions of high temperature, high pressure, and light load. One of the disc-type steam insulation trap steam pipe steam trap on the main steam room insulation, advanced structure, in the absence of condensate, the trap tightly closed, high-quality work, long life, high pressure overheating Steam traps. More Search Keywords: Traps