High and low temperature test chamber is mainly used for parts and materials of related products such as LED, plastic, hardware and metal, aerospace, electronic electrician, auto motorcycle, colleges and universities, research institutes, etc. under the condition of high temperature, low temperature (alternating) cyclic change. , test its performance indicators. It is a necessary test equipment for a large number of enterprises and colleges and universities. 4. Our company promises that our customers will arrange engineers to provide free on-site maintenance and maintenance work every quarter, as well as feedback on the use of equipment and customer suggestions.
Satin Metallic Wrapping Film is no bubbles, no fade, slow down aging, preserve the value of your car, not need for waxing , coating, and simple clean, easy to applied and easy removed, change car color not damage car paint, color collocation is more independent, low daily maintenance cost.
Material: PVC
Size : 60'' x 59' ( 152CM x 18M )
We are China Origin Factory of Vinyl Vs Vvivid. If you have any question, please feel free to Contact Us.
Vinyl Leather Repair Kit,Vinyl Graphic Wrap,Vinyl Helmet Wrap,Satin Metallic Wrapping Film Guangzhou Carlori Co., Ltd , https://www.carloriauto.com
When using a high-low temperature chamber, we need to pay attention to the following points:
First, the high and low temperature test chamber sticks to professional management. Our company will send professional engineers on-site commissioning and use of training work. If the customer company personnel changes greatly, the customer needs our company to arrange engineer homework training again to obtain more professional maintenance and repair. The experience and ability of the high and low temperature test chamber suggest placing it in a relatively benign temperature environment. The optimal ambient temperature and humidity is: 5°C～+30°C≤85%RH. For laboratories or factory workshops that do not have this condition, Equipped with an appropriate air conditioner or cooling tower. To ensure the life of the compressor and the overall experimental results of the machine.
Second, high and low temperature test chamber circulating fan, condenser fan cleaning and balance: similar to the cleaning of the evaporator, due to the different working environment of the test chamber, the circulating fan and the condenser fan will gather a lot of small particles such as dust, should Regular cleaning, waterway and humidifier cleaning: If the waterway is not smooth, humidifier fouling can easily lead to humidifier dry, may damage the humidifier, so you must regularly clean the waterway and humidifier.
Third, regular cleaning of high and low temperature test boxes to ensure good ventilation and heat transfer performance. For compressors using water-cooled cooling, in addition to ensuring that the inlet pressure and inlet temperature, it must also ensure that the corresponding flow and regular The inside of the condenser is cleaned and descaled to obtain its continuous heat exchange performance. The relocation should be carried out under the guidance of the technical personnel of Hongda in order to avoid unnecessary damage or leakage of refrigerant, etc. The inner wall should be cleaned if it is not used for a long time. Clean, keep dry, and power the device once every half-day for no less than 1 hour.