The Plate-Fin Heat Exchanger can realize air-air, air-water, air-oil, refrigerant-air, and other fluid medium heat exchange processes. The tube&Flat fin heat exchanger can realize the air-water, air-air fluid medium heat exchange process, and the cold plate heat exchanger can realize the water cooling cycle refrigeration process.
Air Conditioner Condenser,Air Condenser,Rotary Evaporator,Rotary Vacuum Evaporator Xinxiang Zhenhua Radiator Co., Ltd. , https://www.thermictransfer.com
1. Confirm whether the test point is within the effective coverage area of ​​the base station.
2, confirm the ping packet test is normal.
3, confirm the signal strength, signal fluctuations are normal.
4. Check whether the power of the test terminal network card is enabled.
5. Log into the base station to see if the user list has other user influence.
6. Check if there are other wireless signals in the vicinity that are maliciously interfered.
7. Test the throughput of wired links and wireless links separately and locate problems.
8. If the throughput on the wireless side is low, check the wireless environment, try to replace the channel, and adjust the antenna angle.
9. If the throughput on the wired side is low, check the network cables, POE modules, and switches.
10. Confirm whether the test terminal is normal, such as whether the operating system is poisoned, you can try to replace other terminal comparison tests.
If you can't solve the problem according to the above methods, please call Shenzhen Leian technical personnel to help you solve the problem. When we encounter problems, we must calmly analyze the reasons, and slowly investigate, in order to find out where the problem lies. General wireless bridge monitoring equipment factory we have undergone rigorous testing and debugging, generally there will be no equipment quality problems, there will be no hardware problems, you can rest assured that use.
How to solve the problem of low throughput of wireless bridge video transmission equipment
In the wireless bridge video surveillance system, when the system is built, it often encounters the following problems: poor signal strength, low throughput, severe packet loss, and large delay. At this point you do not need to panic, please follow the following methods to troubleshoot the problem, here's a brief description of the wireless bridge after the completion of the test throughput is low: