The engineering rescue vehicle is very important to us. It has some similar uses with the fire truck, but it has a wider range of uses. It can be used for rescue in major natural disasters, and can also be used for general rescue such as water supply pipeline maintenance, emergency power supply, and emergency lighting. Risk operation. Like a fire truck, it only appears when there is demand. Therefore, regular inspections and maintenance should be carried out at ordinary times to ensure that rescue operations can be carried out in the best condition when there is an emergency rescue mission. Engineering rescue vehicle manufacturer telephone First of all, we must be clear about the equipment on the engineering rescue vehicle, and carry out maintenance operations according to the equipment. For example, the aluminum alloy rolling door is generally installed on the engineering rescue vehicle box, because the rolling door will be used in the harsh environment for a long time. There is a lot of dust. In order to ensure normal use, the surface of the rolling door should always be removed with a soft dry cloth to remove dust and dirt; check the condition of the rolling door sealing strip, if it is damaged or aging, it must be replaced, bolts, screws or threaded hardware If it is loose, tighten it. After each operation, it should be closed to prevent the equipment inside the box from being wetted by rain. Engineering rescue vehicle manufacturer telephone The main equipment of the engineering rescue vehicle includes air compressors, generator sets, plasma cutting machines, water pumps, lifting lights and other emergency tools. Let's take a look at the maintenance and maintenance of these main equipment: The air filter, oil filter, oil fine separator, and coolant on the air compressor should be regularly inspected and maintained. When a problem is found in a component, it should be overhauled or changed in time to avoid affecting the performance of the entire equipment during use. In addition to the seasonal maintenance of the generator set, the daily maintenance of the diesel generator set can not be ignored. According to different maintenance components, different maintenance methods are developed to ensure that the generator set can reach the best condition during operation. The maintenance of the plasma cutting machine is mainly on the cutting torch. The cutting torch should be assembled correctly before use. After use, it should be noted that the consumable parts should be replaced in time before being completely damaged, cleaning the connecting thread of the cutting torch, cleaning the contact surface of the electrode and the nozzle, etc. When not in use, check the gas and cooling gas every day to avoid the collision and damage of the cutting torch. Engineering rescue vehicle manufacturer telephone Because the water pump runs underwater, the requirements for sealing performance are particularly strict, and it must be maintained and maintained after each use. The lifting cylinder of the lifting lamp should be checked regularly to see if it is extended or retracted normally. If it cannot be lifted normally, repair it in time; when the lamp fails, it should be inspected and repaired by professionals or trained personnel. Do not disassemble it without authorization. Prevent injury or damage to the equipment. Engineering rescue vehicle manufacturer telephone At present, there are different types of rescue vehicles on the market, and maintenance needs to be carried out according to different configurations. It is recommended to develop a complete maintenance form, which can extend the service life of the rescue vehicle and make it best To the rescue. Engineering rescue vehicle manufacturer telephone Car Wash Machinery,Touchless Car Wash Machine,Car Washing Machine Systems,Car Wash Machine With Five Brushes Wuxi Golden Boat Car Washing Equipment Co.,Ltd , https://www.carwashauto.com
