Hf Induction Heater for Diamond Tool Welding Brazing (XG-25)

September 12, 2020

Model NO.: XG-25
Efficiency: 96%
Duty Cycle: 100%
Precision: 0.1%
Cooling Method: Water Cooling
Working Theory: Electromagnetic Induction Heating
Trademark: Kechuang Electronic
Transport Package: Plywood Cases
Specification: XG-25
Origin: Zhengzhou, China
HS Code: 8514400090
Model NO.: XG-25
Efficiency: 96%
Duty Cycle: 100%
Precision: 0.1%
Cooling Method: Water Cooling
Working Theory: Electromagnetic Induction Heating
Trademark: Kechuang Electronic
Transport Package: Plywood Cases
Specification: XG-25
Origin: Zhengzhou, China
HS Code: 8514400090
HF Induction Heater for Diamond Tool Welding Brazing (XG-25) Technical Parameters:
 

Model type		 XG-25
Input  power 25KVA
Input  voltage 380V±10%  50HZ/60HZ
Max input current Single phase  38A
Oscillating  frequency 20-80KHZ
Inverted  power ≤25KVA
Water  pressure 0.15MPA≤water pressure≤0.3MPA



Kechuang IGBT Induction Brazing welding machine General Impression:

    IGBT Braze welding machine Technique data:
    Power range: 8KVA- 1000KVA
    Frequency range: 0.5KHz- 500KHz
    Input power: Three phase 380V± 10% 50Hz
    Work pressure: 0.15MPa- 0.30MPa

Kechuang IGBT Induction  Brazing welding machine Feature:
(1) Fast heating, uniform, which can effectively prevent zigzag caused by local overheating embrittlement and fracture, but also can prevent lack of penetration cause off tooth and other bad phenomenon;
(2) Suitable for welding high performance, high hardness serrated saw blade.
(3) Provide welding arts, installation simple and useful convenience.
(4) Compared to thyristor medium frequency furnace, save energy 10-30%.
(5)Can complete minimum and maximum head welding, all kinds of power, frequency for your selection.


Induction Brazing Welding Machine Water Cooling System:
1.Technique data
Input voltage;three phase 380V±10%
Rated voltage: three phase 380V  50Hz
Cooling capacity:31100Kcal/h-1806000Kcal/h
2. Feature
Cooling water tower movement all adopt in thermal efficiency high copper tube, let the working fluid (water or other liquid) in its line through, through the fan and air for natural heat exchange, one-time finish. It is not only energy conservation and environmental protection,but also tube is clean and unobstructed, reduce the failure rate, prolong the useful life of the equipment. Closed circulating cooling reduce pipe corrosion and scaling, do not need to pool, covers an area of small, convenient to move, energy saving, simple operation.
Customer service:
Call or e-mail us any time. Before you place your order, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for your market.
 
 Quick Delivery:
With your wide requested of faucets with even less than our MOQ, we are able to fulfill most requests within short days of your order.
 
 Promise :
Customers Satisfaction, provide good quality and reasonable price and constant after sale service to be engaged in 100% of us .Our Warranty period is one year.
 
 Induction Brazing Welding Machine Selection :
You can just let us know the type, power, frequency, quenching ways, quenching hardness ,depth and materials, choosing proper frequency according to production efficiency. According to specific workpiece shape, material, welding material and so on to decide. choosing according to smelter furnace and production efficiency, choosing according to product speed, materials, temperatures and so on. If is the axial, please tell us the diameter of the axial? If you have drawings please send us. please contact us more specification.








     HF Induction Heater for Diamond Tool Welding Brazing (XG-25) Technical Parameters:
 

Model type		 XG-25
Input  power 25KVA
Input  voltage 380V±10%  50HZ/60HZ
Max input current Single phase  38A
Oscillating  frequency 20-80KHZ
Inverted  power ≤25KVA
Water  pressure 0.15MPA≤water pressure≤0.3MPA



Kechuang IGBT Induction Brazing welding machine General Impression:

    IGBT Braze welding machine Technique data:
    Power range: 8KVA- 1000KVA
    Frequency range: 0.5KHz- 500KHz
    Input power: Three phase 380V± 10% 50Hz
    Work pressure: 0.15MPa- 0.30MPa

Kechuang IGBT Induction  Brazing welding machine Feature:
(1) Fast heating, uniform, which can effectively prevent zigzag caused by local overheating embrittlement and fracture, but also can prevent lack of penetration cause off tooth and other bad phenomenon;
(2) Suitable for welding high performance, high hardness serrated saw blade.
(3) Provide welding arts, installation simple and useful convenience.
(4) Compared to thyristor medium frequency furnace, save energy 10-30%.
(5)Can complete minimum and maximum head welding, all kinds of power, frequency for your selection.


Induction Brazing Welding Machine Water Cooling System:
1.Technique data
Input voltage;three phase 380V±10%
Rated voltage: three phase 380V  50Hz
Cooling capacity:31100Kcal/h-1806000Kcal/h
2. Feature
Cooling water tower movement all adopt in thermal efficiency high copper tube, let the working fluid (water or other liquid) in its line through, through the fan and air for natural heat exchange, one-time finish. It is not only energy conservation and environmental protection,but also tube is clean and unobstructed, reduce the failure rate, prolong the useful life of the equipment. Closed circulating cooling reduce pipe corrosion and scaling, do not need to pool, covers an area of small, convenient to move, energy saving, simple operation.
Customer service:
Call or e-mail us any time. Before you place your order, we will be happy to discuss your detailed requirements with you and help you find a selection of machine that is just right for your market.
 
 Quick Delivery:
With your wide requested of faucets with even less than our MOQ, we are able to fulfill most requests within short days of your order.
 
 Promise :
Customers Satisfaction, provide good quality and reasonable price and constant after sale service to be engaged in 100% of us .Our Warranty period is one year.
 
 Induction Brazing Welding Machine Selection :
You can just let us know the type, power, frequency, quenching ways, quenching hardness ,depth and materials, choosing proper frequency according to production efficiency. According to specific workpiece shape, material, welding material and so on to decide. choosing according to smelter furnace and production efficiency, choosing according to product speed, materials, temperatures and so on. If is the axial, please tell us the diameter of the axial? If you have drawings please send us. please contact us more specification.








    

Pressure-limiting valves are a type of pressure control valve. They safeguard the system against excessive system pressure or limit the operation pressure. ... They generate a largely constant pressure drop between the inlet and outlet on the valve. In the opposite direction the flow can pass freely.

Pressure Limiting Valves

Trailer Pressure Limiting Valve,Iveco Pressure Limiting Valevs,Daf Air Brake Valves,Volvo Pressure Control Valves

SHANGQIU FLAT WORLD MACHINERY CO.,LTD , https://www.flatworldtrucks.com