Customized Plastic Table Chair Mould

Model NO.: JSL-A170714-27
Mould Life: 300000-1000000 shots
Warranty: 1 Year
Customized: Customized
SMC Mould Standard: Dme
Mould Quality Control: by Professional QC
Mould Type: Compression Mould
Trademark: JSLMOULD
Transport Package: Wooden Crate
Specification: Dme
Origin: Taizhou, China
HS Code: 8480719090
Rectangular shape plastic table mold

Provide mould core & cavity steel certificate
Provide mould trial video and good after-service
 
Product Name Plastic Table Mould,Plastic Chair Mould
Plastic material PP
Core&Cavity Steel 718
Steel hardness:  HRC34-38
Mould Standard DME
Cavity Number 1
Injection System direct gate
Ejector System ejector pin
Cycle Time 40 seconds/shot
Tooling lead time 60 days
Mould life 1,000,000 times
Quality assurance ISO9001
 
Our Advantage 1.High quality
2.Reasonable price
3.On time delivery
4.Good After-sale service
5.Strict quality control
6.All the mould are automotic.
 
Offer you In-time response on letters, telephone calls or fax
In-time supply the quotation and mould designs
In-time communication on the technical points
In-time sending pictures for the mould machining progress and mould finishing schedule
In-time sending pictures for the mould machining progress and mould finishing schedule
In-time mould delivery
 
 
 For more information pls contact us.
 
The photo of JSLMOULD:
 

Raw material: Pp
Mould steel: 2738
Steel hardness: HRC35-38
Heating type: Electric heating
Lead time: 60 days
Mould life: 200, 000 times
Quality assurance: ISO9001  

brief introduction
The cyclone was used in 1885 and has developed into many forms. According to the way of air entry, it can be divided into two categories: tangential entry and axial entry. Under the same pressure loss, the latter can handle about 3 times the gas and the air distribution is even.
The Cyclone Dust Collector is composed of an intake pipe, an exhaust pipe, a cylinder body, a cone and a ash hopper. The cyclone Dust Collector is simple in structure, easy to manufacture, install and maintain management. The investment and operation cost of the equipment are low. It has been widely used to separate solid and liquid particles from the air or separate solid particles from the liquid. Under normal operating conditions, the centrifugal force acting on particles is 5~2500 times that of gravity, so the efficiency of cyclone separator is significantly higher than that of gravity settling chamber. Based on this principle, a cyclone dust removal device with a dust removal efficiency of more than ninety percent has been successfully developed. In the mechanical dust remover, the cyclone dust collector is the most efficient one. It is suitable for the removal of non - adhesive and non - fibrous dust. Most of them are used to remove particles above 5 m. The parallel multi tube cyclone device also has 80 to 85% dust removal efficiency for 3 - M particles. The cyclone duster constructed with special metal or ceramic materials with high temperature resistance, abrasion resistance and corrosion can operate at a temperature of 1000 degrees C and pressure of 500 x 105Pa. In terms of technology and economy, the control range of pressure loss for cyclone dust collector is generally 500 to 2000Pa. Therefore, it belongs to the medium effect dust collector, and can be used for the purification of high temperature flue gas. It is a kind of widely used dust remover, and it should be used in the dust removal of boiler flue gas, multistage dust removal and predusting. Its main drawback is the low removal efficiency of fine particles (<5, m).

Cyclone Dust Collector

Cyclone Dust Collector,Industrial Cyclone Dust Collector,Woodworking Cyclone Dust Collector,Dust Collection Cyclone Dust Collector

Botou Youjian Environmental Protection Equipment Co. LTD. , http://www.btdustmachine.com